PRODUCTS
 
   
  CERAFLUX - PRODUCTS FOR ALUMINIUM MELTING/ FOUNDRIES  
     
 

Diecoats, Lubricants, Sand binders, Coatings (Zircon / Graphite / Ceramic) >> Coatings >> Graphite Coatings >> CRAFTCOTE - 10 (Graphite -Water Based Coating.)

 
     
 

THE PRODUCT :
CRAFTCOTE – 10 is a Refractory Coating with Graphite as main Refractory Filler.
CRAFTCOTE - 10 is designed to cope up the present market situation of cost reduction.
CRAFTCOTE -10 is supplied in powder form, which can be diluted by water as per the requirement of the process

 
     
 

PRODUCT FUNCTION :
CRAFTCOTE – 10 is developed as a techno-commercial advanced products for Molasses moulding system. Generally Graphite water base paints are recommended for C.I. Casting. CRAFTCOTE is designed to acquire all the properties of ready for use product when diluted with water at shop floor and given sufficient period

It can be applied by brushing / dipping/ spraying. It gives excellent surface finish on casting.

 
     
 
APPLICATION :
Take required quantity of CRAFTCOTE – 10
Dilute with water in the ratio of 1:2 (Product : Water)
Soak the Blend for minimum 8 -10 hrs.
Take required quantity of blend, dilute with water to specified properties
Ensure that the coating is mixed thoroughly for Homogeneity.
Apply the coating on the mould as per requirement
Air dry for 10-20 min.
Oven dry @ temperature of 150 – 160?C for 20 minutes.
Ensure that the mould is free from 4moisture.
Generally a separate tank should be used for dilution of the coating
 
     
  PROPERTIES :  
 
The physical property of CRAFTANOL - 10 is as follows : -
Colour Black
Apperance Powder
Coating by Brushing No peel off /No cracks on dilution 1:2 (Product : Water)
 
     
 

STANDARD PACKING :
50Kg HDPE Bag

  
     
 

NOTE :
Above information is true and accurate based on controlled laboratory testing. However user is responsible for determining suitability for application at their end. No guarantee is implied since the condition in actual differ widely & beyond our control.